-
Fi156 Storch 1.6M Pre-Built ARF Balsa Electric RC Plane Military Green
$500.00
$321.99 -
VolantexRC Saber 920 3D RC Plane PNP Model No TW-756-2
$235.00
$151.97 -
Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$108.95 -
Starmax F-22 Raptor 70mm EDF Jet Electric R/C RC Airplane Plane Ready-To-Fly
$389.92
$259.97 -
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps Ready-To-Fly
$429.00
$299.97 -
F-105 Thunderchief 64mm EDF RC Jet Plane PNP
$199.00
$159.99 -
Hawker Hunter 90mm EDF RC Jet Kit Verison
$350.00
$189.97 -
Volantex RC Ranger 400 RC Airplane with 6-Axis Gyro System Ready-To-Fly 761-6
$150.00
$91.98 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
Mini Cessna 200mm/8'' Indoor Electric RC Airplane Ready-To-Fly
$39.00
$15.95
Product Description
Bonanza is based on the late 1940’s civilian aircraft the Beechcraft Bonanza.
With a low wing and a wingspan of only 950mm, this is a plane that you can take
anywhere. Durafly has designed it as an easy hand launcher.
It is built of superbly finished, tough EPO and comes with stickers already applied. All electrics are pre-installed, just fit your receiver and battery. For better control, Durafly has fitted ball links on all control surfaces. The Bonanza is ready to "Throw it and Show it"
The Bonanza has a big wing that makes it a stable flier, but has heaps of power and will easily do the major tricks, loops and rolls, with poise. After a successful flight, you can slow down and float in for a stress-free belly landing.
Features:
• Quick, easy assembly
• Superbly finished, highly compressed EPO construction
• Hand launch, belly landing
• 4 Channels (ailerons, elevator, rudder (V-Tail), throttle)
• Ball links for control surfaces
• Strong, fully molded plastic cowl and belly skid
• Full 4 channel control: Elevator, rudder, throttle and aileron
• V-Tail tailplane
• Aileron servo covers
Specs:
Wingspan: 950mm (37.4")
Length: 650mm (25.6")
Flying Weight: 540g (19.5oz) (inc all electronics and battery)
Servo: 9g x 4
ESC: 20A
Motor: 1300KV
Propeller: 7x5
Suggested battery: 3S 1300mAh
CG position: 70mm +/- 5mm
Control surface throws: ±8mm
Suggested Set-Up:
C of G: 90mm ± 5mm (measured from leading edge at root of wing)
Elevator: 8mm each way (+ 30% exponential)
Ailerons: 8mm each way (+ 25% exponential)
Rudder: 12mm each way (+ 25% exponential)
Required (not included):
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1300mAh 3S LiPo battery
CA Glue
It is built of superbly finished, tough EPO and comes with stickers already applied. All electrics are pre-installed, just fit your receiver and battery. For better control, Durafly has fitted ball links on all control surfaces. The Bonanza is ready to "Throw it and Show it"
The Bonanza has a big wing that makes it a stable flier, but has heaps of power and will easily do the major tricks, loops and rolls, with poise. After a successful flight, you can slow down and float in for a stress-free belly landing.
Features:
• Quick, easy assembly
• Superbly finished, highly compressed EPO construction
• Hand launch, belly landing
• 4 Channels (ailerons, elevator, rudder (V-Tail), throttle)
• Ball links for control surfaces
• Strong, fully molded plastic cowl and belly skid
• Full 4 channel control: Elevator, rudder, throttle and aileron
• V-Tail tailplane
• Aileron servo covers
Specs:
Wingspan: 950mm (37.4")
Length: 650mm (25.6")
Flying Weight: 540g (19.5oz) (inc all electronics and battery)
Servo: 9g x 4
ESC: 20A
Motor: 1300KV
Propeller: 7x5
Suggested battery: 3S 1300mAh
CG position: 70mm +/- 5mm
Control surface throws: ±8mm
Suggested Set-Up:
C of G: 90mm ± 5mm (measured from leading edge at root of wing)
Elevator: 8mm each way (+ 30% exponential)
Ailerons: 8mm each way (+ 25% exponential)
Rudder: 12mm each way (+ 25% exponential)
Required (not included):
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1300mAh 3S LiPo battery
CA Glue