-
TopRC Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Green
$189.00
$88.97 -
Focke-Wulf Ta-152H 1.3M PNP RC Plane
$399.00
$219.92 -
Dynam Messerschmitt BF-110 59''/1500mm EPO Electric RC Plane Ready-To-Fly
$599.00
$409.97 -
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99 -
Dynam Turbo Jet V2 Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps PNP
$319.00
$223.97 -
F/A-18E Hornet 64mm EDF Electric R/C RC Jet Airplane Plane Ready-To-Fly
$369.00
$239.97 -
Volantex ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) PNP
$289.00
$166.99 -
Bleriot XI Wingspan 1800mm ARF Pre-Built Balsawood Scale Airplane SCG34
$999.00
$552.92 -
S.E.5A SE5a 1.62M(63.8")Balsa Wood Pre-Built ARF RC Airplane
$529.00
$329.99 -
Volantex Ranger 2000 V757-8 2000mm Wingspan EPO FPV Aircraft RC Airplane PNP
$299.00
$156.99
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-1.JPG)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-2.JPG)
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO