-
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
TopRC A1 White 800mm/32'' EPO Electric RC Airplane PNP
$199.00
$98.99 -
Freewing F9F Panther 64mm RC EDF Jet (PNP) - As Fast As 95MPH
$199.00
$109.97 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane Ready-To-Fly
$429.00
$319.97 -
F3A 50e 50 Class 54" (1380mm) RC Plane PNP
$399.00
$239.92 -
Extra 330 1000mm Wingspan Balsawood 3D Aerobatic Pre-Built ARF RC Plane
$350.00
$159.99 -
Albatross DIII 1.8M Pre-Built Balsawood ARF Scale RC Airplane (SCG31)
$999.00
$552.92 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
Volantex ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) PNP
$289.00
$166.99 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$65.98
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-1.JPG)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-2.JPG)
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO