-
F3A 50e 50 Class 54" (1380mm) RC Plane PNP
$399.00
$239.92 -
Extra 330 1420mm Wingspan 3D Aerobatic RC Plane PNP Built with Strong EPO Materials
$482.00
$299.99 -
LX-Model F-117 Nighthawk Stealth Fighter 64mm EDF Electric RC Jet Airplane PNP
$269.00
$151.97 -
AF-Models Viper 64mm EDF RC Jet PNP Blue
$305.00
$169.99 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps PNP
$359.00
$209.99 -
Dynam Primo 1450mm Wingspan RC Airplane Ready-To-Fly
$399.00
$299.97 -
VolantexRC Saber 920 3D RC Plane PNP Model No TW-756-2
$235.00
$123.97 -
Mirage 2000 90mm EDF Electric RC Jet Kit Version
$269.00
$178.97 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$166.99
Product Description
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam
construction. The wingspan stretches 50 inches while the fuselage stretches 40
inches. The Tempest is equipped with Dynam's 600kv brushless outrunner motor and
a 40amp brushless electronic speed controller providing great power to weight
ratio. The control surfaces come alive through the operation of pre-installed 9
gram servos for the aileron, rudder, and elevator. The Tempest is also equipped
with retractable servo less landing gear.
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-2.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-3.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-5.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-6.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-8.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-9.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-10.jpg)