-
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane Ready-To-Fly
$429.00
$319.99 -
Tasman 1500mm(59.1'') wingspan with Air-Filled Tires PNP RC Plane
$359.00
$199.99 -
AVIOS KingTwin 1700mm Wingspan Executive Turboprop RC Airplane PNP
$599.00
$392.92 -
Dynam BF-109 50'' EPO Electric RC Airplane Ready-To-Fly
$419.00
$319.97 -
Tecnam-2010 1450MM (57'') Wingspan RC Plane PNP With Vector Stabilizer
$399.00
$245.92 -
Dynam Hawker Tempest 1250mm Electric RC Plane Ready-To-Fly
$429.00
$316.97 -
Bleriot XI Wingspan 1800mm ARF Pre-Built Balsawood Scale Airplane SCG34
$999.00
$552.92 -
Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Camo
$189.00
$96.99 -
Dynam Devil 3D Sport Aerobatic Bi-Plane EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Dynam Turbo Jet Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps Ready-To-Fly
$429.00
$299.97
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Power System: Detrum BM2815-1100KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour