-
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$165.99 -
Vulcan PRO 70mm EDF RC Jet PNP Yellow
$365.00
$252.82 -
Husky Ultimate 6S PNP 1800mm STOL Bush RC Plane
$599.00
$349.92 -
AVIOS Extra 330LX V2 3D Aerobatic 1420mm 56" RC Airplane PNP
$482.00
$299.99 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
Large 1200mm Dynam P-51D Mustang Ready-To-Fly Electric RC Airplane
$399.00
$319.97 -
Dynam PT-17 1300mm Wingspan EPO RC Plane PNP Blue
$329.00
$218.99 -
Toprc P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$219.99 -
PT-17 Stearman 1400mm Balsa Pre-Built ARF RC Plane
$595.00
$359.99 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane PNP
$319.00
$217.99
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Power System: Detrum BM2815-1100KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour