-
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
F-18 Hornet V2 64mm EDF Jet RC Plane PNP
$336.00
$169.92 -
P-51 Mustang 4 Channel Warbird Ready to Fly 2.4Ghz 800mm Wingspan
$289.00
$189.97 -
AT-6 Texan 5-CH 2.4Ghz 1370mm Electric R/C RC Airplane Plane Ready To Fly
$399.92
$299.97 -
Dynam PT-17 1300mm Wingspan EPO RC Plane PNP Blue
$329.00
$208.99 -
Dynam Peaks Pitts Model 12 42''/1070mm Electric EPO RC Plane PNP
$319.00
$199.92 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Red
$359.00
$201.92 -
Dynam Primo 1450mm Wingspan RC Airplane Ready-To-Fly
$399.00
$299.97 -
S.E.5A SE5a 1.62M(63.8")Balsa Wood Pre-Built ARF RC Airplane
$529.00
$311.92 -
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99
Product Description
It is the upgraded version (V2) of the Dynam T-28 Trojan. This new version of Dynam T-28 Trojan V2 Red features a Tomcat Skylord-50A ESC, retractable landing gear, and pre-installed flap servos, adding realism to your flying experience. The North American Aviation T-28 Trojan was a piston-engined military trainer aircraft used by the US Air Force and the US Navy in the 1950s. Besides being a trainer, the T-28 was successfully employed as a Counter-insurgency (COIN) aircraft, primarily during the Vietnam War.
FEATURES:
Tomcat Skylord 30 Amp ESCs with XT60 connector
Pre-installed and fully operational flaps and flap servos
Realistic scale features including US Navy paint scheme
Hand painted pilot figures and molded panel lines
Servoless electronic retractable landing gear
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL : 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1270mm / 50in
Length: 1000mm / 39.3in
Flying Weight: 1350g / 47.6oz
CG (Center of Gravity) 70 - 75mm from the leading edge at the wing root
Power System: Detrum BM3720-800KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-50A
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Ready, servos installed
Hinge Type: Foam
Material: EPO Foam
FEATURES:
Tomcat Skylord 30 Amp ESCs with XT60 connector
Pre-installed and fully operational flaps and flap servos
Realistic scale features including US Navy paint scheme
Hand painted pilot figures and molded panel lines
Servoless electronic retractable landing gear
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL : 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1270mm / 50in
Length: 1000mm / 39.3in
Flying Weight: 1350g / 47.6oz
CG (Center of Gravity) 70 - 75mm from the leading edge at the wing root
Power System: Detrum BM3720-800KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-50A
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Ready, servos installed
Hinge Type: Foam
Material: EPO Foam