-
Fi156 Storch 1.6M Pre-Built ARF Balsa Electric RC Plane Military Green
$500.00
$321.99 -
TopRC Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$97.99 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP
$359.00
$237.99 -
Dynam Cessna 188 Crop Duster 59''/1500mm PNP Electric RC Plane Orange
$319.00
$177.99 -
DG-808S 4m/157'' RC Glider Electric Motor Version
$699.00
$423.97 -
Volantex RC Ranger 400 RC Airplane with 6-Axis Gyro System Ready-To-Fly 761-6
$150.00
$91.98 -
VolantexRC Vector28 2.4Ghz Super High Speed Pool Racer RC Boat (795-1) Ready-To-Run
$135.00
$39.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane Ready-To-Fly
$429.00
$319.97 -
Extra 330 1420mm Wingspan 3D Aerobatic RC Plane PNP Built with Strong EPO Materials
$482.00
$299.99 -
Dynam Spitfire 1200mm/47'' EPO Electric RC Airplane PNP
$319.00
$239.97
Product Description
Specifications:
Main rotor diameter: 530mm;
Weight: 305g;
Length: 520mm;
Main blade: wooden;
Power system: 370 motor (included);
Control mode: CCPM system;
Transmitter: 6CH CCPM system (not included);
Servo: 8g,1.3kg.CM,0.13s/60 (included)
Battery: 11.1V 1000mAh Li-Polymer(not included);
Features:
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.
Main rotor diameter: 530mm;
Weight: 305g;
Length: 520mm;
Main blade: wooden;
Power system: 370 motor (included);
Control mode: CCPM system;
Transmitter: 6CH CCPM system (not included);
Servo: 8g,1.3kg.CM,0.13s/60 (included)
Battery: 11.1V 1000mAh Li-Polymer(not included);
Features:
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.