-
Volantex Ranger 2400 5 Channel FPV Airplane With 2.4 Meter Wingspan And Multiple Camera Mounting Platform (757-9) PNP
$369.00
$188.97 -
Dynam Waco Red 1270mm 50inch Wingspan RC Airplane PNP
$309.00
$223.99 -
A-10 Thunderbolt II Twin 50mm EDF Jet PNP
$299.00
$189.99 -
LX SU-47 Berkut Twin 70mm EDF 360 Degree RC Jet With Retracts Kit Version
$259.00
$169.99 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$166.99 -
Goshawk T-45 64mm EDF Jet 950mm Wingspan RC Airplane Ready-To-Fly
$319.00
$259.97 -
TopRC P-51D Mustang 750mm/30.00in EPO Electric RC Airplane PNP Blue
$189.00
$102.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane Ready-To-Fly
$429.00
$319.97 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$59.97 -
Savage Bobber STOL 74"" (1880mm) Wingspan Balsa Wood Pre-Built ARF RC Plane
$999.00
$552.92
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.