-
DW Hobby Fokker E 1200mm Wingspan Electric RC Airplane Laser Cut Balsa Kit
$280.00
$159.91 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$166.99 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Red
$359.00
$225.99 -
Dynam Cessna 188 Crop Duster 59''/1500mm Electric RC Plane Orange Ready-To-Fly
$429.00
$299.97 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
Volantex P-51D Mustang 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane One Key Return Ready-To-Fly
$150.00
$68.99 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
P-40 1100mm Wingspan RC Plane PNP
$359.00
$238.99 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Yellow Ready-To-Fly
$659.00
$389.97 -
P-51 Mustang 4 Channel Warbird Ready to Fly 2.4Ghz 800mm Wingspan
$289.00
$189.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.