-
Dassault Rafale EDF Electric Rc Jet
$329.97 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane PNP
$319.00
$217.99 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane PNP
$319.00
$209.97 -
Bigfoot V2 PNP 1300mm RC STOL Bush Plane
$299.00
$219.92 -
P-40 1100mm Wingspan RC Plane PNP
$359.00
$209.92 -
GlaStar 1.2M RC Plane PNP
$229.00
$189.99 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP Blue
$359.00 -
Sopwith Camel 1.2m RC Airplane Pre-Built Balsa ARF
$390.00
$251.97 -
Dynam T-28 Trojan V2 1270mm (50") PNP RC Plane Red
$319.00
$209.97 -
DG-808S 4m/157'' RC Glider Electric Motor Version
$699.00
$412.97
Product Description
Specifications:
Wingspan: 44''/1120mm
Wing Area: 290 sq. in.
Ready-to-fly weight: 20 -23 oz .
Length: 30''/760m
Power: OX22-13 Outrunner or IX20XL In-runner brushless
Features:
Construction: Precision laser-cut balsa & plywood construction.
Wings: Wing & stabilizer are built-up one piece designs.
Wing Spars: Traditional hardwood spars.
Incidence: Factory pre-set.
Control Surfaces: Conventional sport size control surface area.
Covering: Factory applied Oracover covering. Vinyl graphics also included.
Cowl: Precision color matched pre-painted ABS plastic.
Wheel Pants: Precision color matched pre-painted ABS plastic.
Canopy / Hatch: Pre-formed & pre-painted ABS plastic
Landing Gear: Two piece pre-formed wire gear, installs in the wing.
Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
Hinge Slots: Factory Pre-slotted.
Building Time: 4-6 hours.
Wingspan: 44''/1120mm
Wing Area: 290 sq. in.
Ready-to-fly weight: 20 -23 oz .
Length: 30''/760m
Power: OX22-13 Outrunner or IX20XL In-runner brushless
Features:
Construction: Precision laser-cut balsa & plywood construction.
Wings: Wing & stabilizer are built-up one piece designs.
Wing Spars: Traditional hardwood spars.
Incidence: Factory pre-set.
Control Surfaces: Conventional sport size control surface area.
Covering: Factory applied Oracover covering. Vinyl graphics also included.
Cowl: Precision color matched pre-painted ABS plastic.
Wheel Pants: Precision color matched pre-painted ABS plastic.
Canopy / Hatch: Pre-formed & pre-painted ABS plastic
Landing Gear: Two piece pre-formed wire gear, installs in the wing.
Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
Hinge Slots: Factory Pre-slotted.
Building Time: 4-6 hours.