-
Cessna 170 G2 60E 86'' Night LED Maroon PNP Electric Airplane
$990.00
$462.92 -
Dynam T-28 Trojan 1270mm EPO RC Plane With Retracts PNP Grey
$399.00
$219.97 -
Dynam Turbo Jet Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps Ready-To-Fly
$429.00
$299.97 -
Dynam Turbo Jet V2 Twin 64mm EDF Jet PNP Yellow
$319.00
$226.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane 1280mm Wingspan With Flaps Red Ready-To-Fly
$429.00
$319.97 -
X8 FPV 2122mm Wingspan Flying Wing EPO RC Airplane Kit
$459.00
$295.99 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
LX Super B-25 Mitchell Bomber 2000mm/79'' RC Warbird Airplane PNP
$1,059.00
$488.97 -
Dynam F4U Corsair 1270mm (50") Wingspan RC Airplane Ready-To-Fly
$429.00
$319.99 -
GlaStar 1.2M RC Plane PNP
$229.00
$189.99
Product Description
Type of kit: Pre-Built ARF Balsa
Wingspan (mm): 1200
Length (mm): 830
Flying weight (gr) 1400
CG (Center of Gravity) Check manual
Battery Cells: 4s - 14.8v
Battery Capacity (mAh) 2.200 mAh, 2.800 mAh
Surfaces Ailerons, Elevator, Rudder
Landing Gear Fixed metal wire landing gear
Material Balsa, Plywood, Oracover wings coverage
Build time 1 hour
Required Radio 4 channels minimum
Recommended pilot skill level Beginner, Intermediate
DW Hobby offers a superb reproduction of the famous WW1 Sopwith biplane. Its wooden structure is fully assembled and covered. It comes with very nice wingspan of 1.2m with finishes close to size.
Sopwith Aviation Company was a British aircraft manufacturer which designed and manufactured aircraft primarily for the Royal Flying Corps, the Royal Naval Air Service during World War I and later the Royal Air Force. Probably the best known of the devices it produced is the Sopwith Camel. The devices produced by Sopwith were also used by the French, Belgian and American armies.
Features:
Light
Realistic flights
A brilliant livery in the colors of the RAF
Very easy final assembly
Specifications:
Wingspan: 1200mm
Length: 830mm
Flying weight: about 1.4kg
Surfaces Ailerons, Elevator, Rudder
Landing Gear Fixed metal wire landing gear
Material Balsa, Plywood, Oracover wings coverage
Build time 1 hour
Required To Fly (not included):
Motor: Brushless KV950
Propeller: 12 inch
ESC: Brushless 70A
Servo: 4x9g
Recommended Radio and Receiver: 4 channels
Lipo 4Cell 2200-2800mAh battery
Wingspan (mm): 1200
Length (mm): 830
Flying weight (gr) 1400
CG (Center of Gravity) Check manual
Battery Cells: 4s - 14.8v
Battery Capacity (mAh) 2.200 mAh, 2.800 mAh
Surfaces Ailerons, Elevator, Rudder
Landing Gear Fixed metal wire landing gear
Material Balsa, Plywood, Oracover wings coverage
Build time 1 hour
Required Radio 4 channels minimum
Recommended pilot skill level Beginner, Intermediate
DW Hobby offers a superb reproduction of the famous WW1 Sopwith biplane. Its wooden structure is fully assembled and covered. It comes with very nice wingspan of 1.2m with finishes close to size.
Sopwith Aviation Company was a British aircraft manufacturer which designed and manufactured aircraft primarily for the Royal Flying Corps, the Royal Naval Air Service during World War I and later the Royal Air Force. Probably the best known of the devices it produced is the Sopwith Camel. The devices produced by Sopwith were also used by the French, Belgian and American armies.
Features:
Light
Realistic flights
A brilliant livery in the colors of the RAF
Very easy final assembly
Specifications:
Wingspan: 1200mm
Length: 830mm
Flying weight: about 1.4kg
Surfaces Ailerons, Elevator, Rudder
Landing Gear Fixed metal wire landing gear
Material Balsa, Plywood, Oracover wings coverage
Build time 1 hour
Required To Fly (not included):
Motor: Brushless KV950
Propeller: 12 inch
ESC: Brushless 70A
Servo: 4x9g
Recommended Radio and Receiver: 4 channels
Lipo 4Cell 2200-2800mAh battery