-
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$369.97 -
F3A 50E A4 55'' Balsa Electric RC Plane
$520.00
$299.99 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane Ready-To-Fly
$429.00
$319.97 -
Cessna 182 1400mm EPO Electric RC Plane Ready-To-Fly
$399.00
$229.97 -
Toprc P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$219.99 -
Dynam 1200mm Spitfire Warbird 100% Ready-To-Fly Electric RC Airplane
$429.00
$319.97 -
Dynam C-47 Transporter V2 Brushless RC Airplane PNP
$339.00
$225.97 -
Tecnam-2010 1450MM (57'') Wingspan RC Plane PNP With Vector Stabilizer
$399.00
$245.92 -
DW 61" Fokker DR1 Triplane Laser Cut Balsawood RC Airplane Model Kit
$506.00
$259.97 -
PT-17 Stearman 1400mm Balsa Pre-Built ARF RC Plane
$595.00
$359.99
Product Description
Features:
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery