-
Savage Bobber 1000mm (39.4in) Wingspan Balsawood 3D Pre-Built ARF Plane
$280.00
$168.98 -
Skyline MX-2 50 57'' 3D Aerobatic RC Airplane
$389.00
$298.92 -
XK X520 Vertical Takeoff Delta Wing RC Plane
$299.00
$119.97 -
Albatross DIII 1.8M Pre-Built Balsawood ARF Scale RC Airplane (SCG31)
$999.00
$552.92 -
Dynam P-61 Black Widow 1.5m Twin Engine Electric RC Plane PNP
$489.00
$261.97 -
Fokker E.III Eindecker WW1 Fighter Balsa Wood Pre-Built ARF 1580mm Wingspan RC Plane
$526.00
$318.92 -
ASW28 2.6m/103'' Unibody Scale RC Glider PNP
$289.00
$172.95 -
Tasman 1500mm(59.1'') wingspan with Air-Filled Tires PNP RC Plane
$359.00
$199.99 -
VolantexRC Saber 920 3D RC Plane PNP Model No TW-756-2
$235.00
$151.97 -
P-40 1100mm Wingspan RC Plane PNP
$359.00
$209.92
Product Description
Condition: The only issue with this item is the out box slightly damaged. The plane is intact and in factory fresh conditon.
Features:
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery
Features:
High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.
Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.
Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.
2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).
The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).
Highly visible SIBA design
The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight
Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
2-piece wing with fibreglass tube wing joiner
5015 brushless motor 550KV
The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise
Digital servos with metal gears for optimal steering control.
Specifications:
Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min
Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery